1 . Auto-bypass connected with dies which cause constant soft / hard resets. The way this works: If a pass away has caused more than five soft / hard resets within 2 hours then that die will be flagged for autobypass - which means monitoring of its “hashing health” will be further overlooked and the die will be itself. Its DCDC’s will still be monitored for temperature conditions even though, so if soft / tough resets are being caused by heat level issues.. these will NOT be disregarded! The list of dies bypassed is persistent across pi reboots etc, when a die has been bypassed a message will be shown on ADVANCED webpage w/ an option to clear often the autobypass file.
2 . Up-to-date BFGminer to 5. 3. zero
3. Integrated pf4g’s KNCminion webgui extension & included a link “more goodies” on status page.

Minor Add ons:
1 . Disabled http easy access logging by default(option nonetheless exists to enable in SYSTEM page).
2 . Set bfgminer 5. 1 . 0 seeing that default miner to be leaped (can still change it to five. 3. 0 via ENHANCED page).
3. Minor alterations to ADVANCED running bfgminer version readout.
4. Included reset count per cease to live to /var/log/monitordcdc. log
5 various. Optimized various sections of my very own code additions in checking script.

Also:

CONFIGURABLE DCDC OVERHEAT PROTECTION: (The BIGGEST threat to Titan owners!! ) This feature stops the DCDC’s climbing approximately high in temp(granted temps tend to be configured below 100C). Dies will be invidiually clock along by 25mhz until they are below the DCDC temp threshold specified. Dies will be turned off if 100mhz is not great enough.
PROPER DIE RESETS performed when dies go to a “dead” state while gold mining. First attempts a number of soft resets, if those endeavors fail, bfgminer is ended, affected cube powered straight down, powered up then bfgminer restarted. note: will not resolve permanently damaged dies.
On top of that, if certain dies ended up issued nonstop soft resets via KNC’s original code, because that will lead to a hardcore reset often using this code, there is a bypass_dies. conf file which manually might be edited for bypassing regarding checking die status entirely.
OPTION to switch between COMMODITY 5. 1 . 0 BFGminer vs newer 5. installment payments on your 0 BFGminer.
Added several meaningful webgui stats.
Important changes in this release: (V. 99b)
FAN-FAIL protection - The way this works is actually, if any die DCDC’s are detected 10C covering the user specified temp threshold(and DCDC protection is enabled) OR DCDC’s are over 115C(and DCDC protection is definitely enabled) then those drops dead will be shut off & bfgminer restarted. A warning within big red letters will be thrown up on the STATUS page of webgui, in addition if using the LCD, the message will switch to “Poss. Fan-Fail! ”. Both the STATUS page message & FLATSCREEN message will say what cube(as labeled per webgui innovative page) was flagged seeing that having a possible fan disappointment.
To clear fan-fail message on status page & LCD… a reboot of the pi will be needed. There is no way to physically detect an actual fan failure as it seems there is not any sort of fan monitoring or control on these panels, so thats why I came up w/ the actual rule based fan failure detection.

Minor changes:
1 . More options in DCDC dropdown menu
2 . Added wall watts estimation to SOPHISTICATED page. Assumes 85% PSU effeciency plus power required for pi, controllerboard & lovers.
3. Replaced default KNC version message on FLAT SCREEN w/ Mod version information

Minor fixes:
1 . Processed hostname(minername) handling & backupname file handling
2 . Taken away bfgminer. sh from git & builds to avoid overwriting peoples custom command series arguments for bfgminer.

For anybody that want to check it out, individuals pics here: http://bitcoinlasvegas.net/kncminer-titan-firmware-knc-miner-firmware-titan-firmware-kncminer-titan-customized-firmware-mod/
It can also be purchased with paypal on ebay: http://bitcoinlasvegas.net/kncminer-titan-firmware-knc-miner-firmware-titan-firmware-kncminer-titan-customized-firmware-mod/